Equal section thin-walled bearings are different from standard bearings. In thin-walled bearings, the cross-sectional size of each series is designed to be a fixed value. In the same series, the cross-sectional size is unchanged, and it does not increase with the increase of inner size. Therefore, this series of thin-walled bearings is also called equal-section thin-walled bearings. By using the same series of thin-walled bearings, designers can standardize the same common parts.　　

 Thin-walled bearings with large inner holes and small cross-sections can use large-diameter hollow shafts instead of small-diameter solid shafts, such as: air, water pipes, and wires can be provided through hollow shafts, making the design more concise, thin-walled bearings can Save space, reduce weight, significantly reduce friction, and provide good rotation accuracy. Without affecting the performance and service life of the bearing, the use of thin-walled bearings can reduce the external dimensions of the design and reduce production costs.　　

Thin-walled bearings have seven open series and five sealed series. The bore diameter ranges from 1 inch to 40 inches, and the cross-sectional dimension ranges from 0.1875×0.1875 inches to 1.000×1.000 inches. There are three types of open bearings: radial contact, angular contact, and four-point contact. Sealed bearings are divided into: radial contact and four-point contact.

We specialize in the production of uniform cross-section thin-walled bearings, thin-walled bearings and non-standard bearing design, development, manufacturing and sales as a comprehensive enterprise. We have a team of experienced bearing designers and technicians. Welcome your inquiry!